Nforce Serial Ata Controller Driver Windows 10

Nforce Serial Ata Controller Driver Windows 10 Download
Nforce Serial Ata Controller Driver Windows 10 1

Nforce serial ata controller driver windows 10 64

Jun 07, 2016 My graphics card is: NVIDIA NFORCE SERIAL ATA CONTROLLER (2X) and the motherboard is: AS ROCK N68-S, and the PC is 32 BIT 64 BIT ready. I was thinking of trying to replace the card myself but do not have a clue as to which one to to purchase and compatibility, Nvidia sent me list compatible with windows 10 but there are loads.

Ata

5,333 downloads·Added on: July 3, 2009·Manufacturer: Others

This package contains the NVIDIA Serial ATA (SATA) Controller SATA drivers (32-bit) for the supported workstation models that are running the Microsoft Windows XP Professional Operating System.

INSTALLATION INSTRUCTIONS:

1. Download the file by clicking the 'Download' or 'Obtain Software' button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:SWSETUPSP44129).
UPDATING THE DRIVER:
To update the driver, complete the following steps:
1. Open the Device Manager (click Start, Settings, Control Panel, then select System, then click the Hardware tab, and then click the Device Manager button).
2. Click the PLUS sign (+) for the 'IDE ATA/ATAPI controllers' entry.
3. There should be three NVIDIA nForce 590/570/550 Serial ATA Controllers listed, click one of them to highlight it.
4. Open the Device Properties (click the Action menu, and then select Properties).
5. Click the Drivers tab, and make a note of the driver version 5.10.2600.xxxx (xxxx is the latest version number). This will be used to check if the controller has been updated in a later step. The version of the driver being updated is 10.3.0.46. Click the Update Driver button; browse the location of the extracted SoftPaq files.
6. If you are prompted to restart (reboot) select No until all of the NVIDIA nForce 590/570/550 Serial ATA Controllers have been updated to the latest driver version 10.3.0.46 (note the driver version captured in the previous step should have a different value).
7. Repeat steps 3 through 6 to update the driver for all of the NVIDIA nForce 590/570/550 Serial ATA Controllers. When all of the controllers have been updated to 10.3.0.46 then restart (reboot) the system.

By clicking at the targeted laptop model, you’ll be able to look through a comprehensive list of compatible devices. # Manufacturer Model Devices 1 NEC PC-GL622R5DD 2 Sony VGN-SZ13TP_B 3 HP P6-2376 4 Sony VGN-FJ370P 5 HP P6-2028uk 6 Sony 81 7 Lenovo ThinkCentre M77 (1995B1U) 8 Sony VGN-Z49D_X 9 NEC PC-VJ14MFDTHFL2 10 Acer Aspire 4551 11 Sony VGN-SZ1M_B 12 LG E300-A.CBHJZ 13 Lenovo ThinkCentre M77 (1983A12) 14 Sony VGN-A215M(GB) 15 NEC PC-GV221BEGA 16 Sony VGN-SZ730E 17 Toshiba Satellite C660D-1E5. Enhanced usb host controller driver.

NOTE

Flysky fs i6 manual. : After the installation is complete, the downloaded directory can be deleted, if desired.

COMPATIBLE WITH:: Windows XP
file size:: 581 KB
filename:: sp44129.exe

CATEGORY:: Other Drivers & Tools

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.

Note that your submission may not appear immediately on our site.